|
Refurbished Rasor Features
|
|
| Cutting Ranges | 40 A | 90A | 120A |
| Steel | 0.028 to 0.25 | 0.028 to 0.500 | 0.028 to 1.00 |
| Aluminum | 0.028 to 0.187 | 0.028 to 0.500 | 0.028 to 0.750 |
| Stainless Steel | 0.028 to 0.187 | 0.028 to 0.500 | 0.028 to 0.750 |
| Variable Current Control | 3 to 40amps | 3 to 90 amps | 3 to 120 amps |
- Welded box beam construction
- Heavy duty center drive with dual side rack and pinion
- Small part and scrap retrieval drawers
- Simple alpha numeric joystick control with parameter input
- Parameter storage for cutting conditions
- Positional accuracy +/- 0.004 in, repeatability 0.001in
- Complete machine parts stocking and consumable parts stock
- Patented torch construction with magnetic field to control plasma arc column
- Proprietary Komatsu torch height control with setup probe
- Pierce height accuracy +/- .015 inches
- Automatic voltage control maintains cutting height at over 100in/min, patented hemispherical collision detection system
- Tested and verified machine accuracy
- Full service and application support
- Toll free telephone support
- Quicksilver process: clean cut stainless steel and aluminum (90 and 120-amp only)
- Ability to process polyethylene coated materials
- Komatsu Windows based Rasor software
- Free instillation and training with purchase of machine
- 6-months parts and labor warranty
- Simple consumables setup with 1 electrode and just 3 nozzles
- Bevel angle +/- 2 degrees
- Material thickness hole cutting one to one ratio
|
|
|
Terms and Conditions