|
Home
> Rasor Fine Plasma
> Used Machines |
Used Rasor™ Cutting Machines
From time to time used Rasor Fine Plasma cutting machines become available. If you have a Rasor cutting machine that you would like to sell, send the description and seller contact information to
sales@komatsuplasma.com so the machine can be listed here.
Our service department can provide assistance in relocating machines. Call 1-800-70 RASOR, or E-mail
sales@komatsuplasma.com for more details.
|
|
Rebuilt KCR-0951, and KCR-0448 are available NOW! |
|
|
KCR-12820 Rasor Rev II 8 x 20, G9120 120 Amp Fine Plasma | |
[click here for more photos]
|
Komatsu Rasor Rev II KCR-12820
8 x 20 table G9120 120 Amp Fine Plasma. Touch Screen Replaced with standard monitor CPU upgraded to Gateway 400 Mhz, 386 Mb RAM As is, where is. Quick Sale, Make an Offer Contact: Don Galbreath, Tucker's Machine & Steel Service, Inc. Tel: (352) 787-3157 x31 |
|
KCR-12620 Rasor Rev II 6 x 20, G9120 120 Amp Fine Plasma | |
[click here for more photos]
|
Komatsu Rasor Rev II KCR-12620
6 x 20 table G9120 120 Amp Fine Plasma. Installed (New) Aug/Sept. 2001 Rasor Writer Argon Marking Auto Arc Automatic Current Control Updated Controller Software V2.0 Nov 2003 Online Nesting, Graphic Part File Viewing SofTool 2D Library, 43 Shapes Pierce Up Routine Under Power in Logan, Utah $90,000 FOB Logan, Utah Exhaust System Available Contact: Layne Davis, Dutro Tel: 435-512-2408 |
|
KCR-1251 Rasor 5 x 10, G9120 120 Amp Fine Plasma | |
[click here for more photos]
|
Komatsu Rasor KCR-1251
5 x 10 table G9120 120 Amp Fine Plasma. Contact: George Lahti Lahti Fabrication Tel: 989-343-0420 |
|
KCR-1251 Rasor 5 x 10, G9120 120 Amp Fine Plasma | |
|
Komatsu Rasor KCR-1251,
5 x 10 table, G9120 120 Amp Fine Plasma. View this used, well maintained machine in good running condition in the Baker Machinery show room, Indianapolis, Indiana Contact: Mark Baker, Baker Machinery, Tel: 317-254-8814 E-mail: markbaker@bakermachinery.com |
|
KCR-12612 Rasor Rev II, 6 x 12, G9120-II 120 Amp Fine Plasma SOLD! | |
 |
This Rasor Rev 6 x 12 with 120 amp Fine Plasma was purchased new and put into production in February,
1999. The machine features a 72"x144" cutting area. The machine has been
on full maintenance with Komatsu since it was purchased.
SOLD! |
|
KCR-0951 Rasor, 5x10, 90 Amp, United Kingdom, 1997 | |
[click here for more photos]
|
The plasma cutter we have for sale is a Komatsu Rasor CNC model KCR-0951.
This is a complete system including: 5 x 10 cutting table, OCU,
computer, OKI Microline9 pin printer with new ribbon,
monitor, all leads etc, 2 box control electronics,
G990 Fine Plasma gas control unit and power unit and torch,
electrical housing for control units and power intake,
dongle-license key,
software: Komatsu Rasor software, SCO Unixware operating system,
workstation complete with nest editor.
The software is 1996, so we think the machine is 1997. We have had it for
3 years. At the moment it is not being used but it does work.
Viewing can be arranged if required.
Contact: Nichola Ross North West Construction U.K. Ltd. Phone: 00 44-0151 691 2906, Fax: 0044-0151 647 1147 E-mail: nicholaross@tiscali.co.uk |
|
KCR-0951 Rasor, 5x10, 90 Amp, Australia, 1996 | |
 |
3000mm x 1500mm cut area - Current use is 4mm,6mm,8mm Steel - Cut speed of
up to 5m p/m on mild steel
Fully operational - Up to 13mm Steel / Alloy [click here for more photos] |
|
The machine is available for operational inspection. The system offers
precision profile cutting on steel and alloy plate up to 13mm at speeds up
to 5m per minute. This unit is currently processing 4mm, 6mm, and 8mm steel,
it has also been used to production cut 6mm alloy.
The FINE PLASMA Cutting Head by KOMATSU features an extremely high velocity high density plasma arc. This system will deliver narrower kerfs and predictable close accuracy. The welded box beam construction provides the rigidity required to handle full capacity size plates without affecting machine performance. The Part Edge quality of the RASOR Fine Plasma System provides precise cuts with square edges and little dross thereby reducing and in many cases eliminating secondary part processing operations. Contact: Ray Smith-Roberts, General Manager ECB Pty Ltd, PO Box 122, Margate, Brisbane, Qld, Australia 4019 Phone: +617 38975700, Fax: +617 32831168 E-mail: ray@ecb.com.au WWW: www.ecb.com.au |
|
| |
Terms and Conditions
Copyright © 2006-2008 Cutting Technologies Div. Komatsu America Industries LLC. All rights reserved.
