Now Through September
Special Deals on Refurbished Rasor Machines

KCR-0448 and KCR-0951 machines are now available on a first come, first served basis. Reserve your Factory Recertified Machine now! Call 1-800-70 RASOR, or E-mail sales@komatsuplasma.com for more details.
Rasor 5 x 10, 90 amp Rebuilt and Factory Recertified KCR-0951 90 Amp Rasor 5 x 10 cutting machine. See photos of this rebuilt KCR-0951 here. This machine can be reconfigured as a KCR-1251 by replacing the G990 with a G9120, 120 Amp Fine Plasma. See original KCR-0951, KCR-0451, and KCR-1251 description. If you would like to see photos of a machine as it is being rebuilt, click here.

Rasor 4 x 8, 40 amp Rebuilt and Factory Recertified KCR-0448 40 Amp Rasor 4 x 8 cutting machine. See original KCR-0448 description. See photos of this rebuilt KCR-0448 here.


For Features of Refurbished Machines, click here
The Deal
  • Purchase by September 30, 2008
  • 6 months waranty
  • One month's use of consumables is free, up to $1000 value
  • Free Komatsu CAM software including
  • Special Payment Options: *
    a) Komatsu Financing *
    • 0% APR for 12 months *
    • No payment for 3 months after machine installation *
    b) without Financing *
    • 50% down with purchase order*
    • No Payments for 90 days *
    • Balance due in full after 90 days*
    • Additional Training 3 and 6 Months after Installation
Note: * Subject to credit approval
The Deal is subject to change without notice.
KCR-0951 Rasor 5 x 10, G990 90 Amp Fine Plasma
Factory Rebuilt and Recertified! See the photos to see the high quality of this Factory Rebuilt and Recertified machine.

This machine can also be configured as a KCR-1251 by replacing the G990 with a G9120, 120 Amp Fine Plasma.

This KCR-0951 is Available NOW!
Rasor 5 x 10, 90 amp
KCR-0448 Rasor 4 x 8, G940 40 Amp Fine Plasma
Factory Rebuilt and Recertified! See the photos to see the high quality of this Factory Rebuilt and Recertified machine.

This KCR-0448 is Available NOW!
Rasor 4 x 8, 40 Amp
Refurbished Rasor Sales Features

Cutting Ranges40 A90A120A
Steel0.028 to 0.250.028 to 0.5000.028 to 1.00
Aluminum0.028 to 0.1870.028 to 0.5000.028 to 0.750
Stainless Steel0.028 to 0.1870.028 to 0.5000.028 to 0.750
Variable Current Control3 to 40amps3 to 90 amps3 to 120 amps
  • Welded box beam construction
  • Heavy duty center drive with dual side rack and pinion
  • Small part and scrap retrieval drawers
  • Simple alpha numeric joystick control with parameter input
  • Parameter storage for cutting conditions
  • Positional accuracy +/- 0.004 in, repeatability 0.001in
  • Complete machine parts stocking and consumable parts stock
  • Patented torch construction with magnetic field to control plasma arc column
  • Proprietary Komatsu torch height control with setup probe
  • Pierce height accuracy +/- .015 inches
  • Automatic voltage control maintains cutting height at over 100in/min, patented hemispherical collision detection system
  • Tested and verified machine accuracy
  • Full service and application support
  • Toll free telephone support
  • Quicksilver process: clean cut stainless steel and aluminum (90 and 120-amp only)
  • Ability to process polyethylene coated materials
  • Komatsu Windows based Rasor software
  • Free instillation and training with purchase of machine
  • 6-months parts and labor warranty
  • Simple consumables setup with 1 electrode and just 3 nozzles
  • Bevel angle +/- 2 degrees
  • Material thickness hole cutting one to one ratio
Click here for refurbished Plasma Units, etc.